TEL:021-59222190
E-MAIL:contact@lymax.com.cn
Address:10th Floor Building18, ZhongXin Enterprise Plaza, Lane88 WuWei Road, PuTuo District, Shanghai
QR CODE
Shanghai Lymax Environmental Technology Co., Ltd.
Shanghai Lymax Environmental Technology Co., Ltd. is a high-tech environmental engineering equipment company with water treatment and separation of chemical liquid as its core and specializing in the field of environmental protection and resource reuse.
ABOUT US
PRODUCTS CENTER
UF membrane and complete sets of equipment
The Lymaxexternal pressure hollow fiber ultrafiltration membrane module produced by UF Limai Environmental Protection Equipment Co., Ltd. adopts modified hydrophilic polyvinyl fluoride materials. It has Long-term tolerability of oxidizing agent with high concentration and can fully inhibit the reproduction of microorganisms. The Lymaxhollow fiber ultrafiltration membrane module has smaller nominal diameter, so it can almost wipe off all particles, germs, most viruses and colloids. The high porosity gives membrane module the flux which is equal to conventional microfiltration module’s. So it’s a better option than conventional microfiltration module in most cases.
Features of products:
Modified PVDFhydrophilic membrane which is not easy to scale and has strong antipollution capacity.
After special hydrophilic treatment, PVDF pressure ultrafiltration membrane of Limai Environmental Protection Equipment Co., Ltd. has permanent hydrophily, it can get high flux under lower pressure. And it has strong antipollution capacity.
Single layer structure and high flux
Great chemical stability, especially strong antipollution capacity and long service time.
Lyma pressure ultrafiltration membrane uses high-quality PVDF material; it has superior performance of acid resistance, alkali resistance and grease resistance. It has strong antipollution capacity and homogeneous membrane pore size. The separation efficiency is high and the water quality is stable.
High removal rate of germs and viruses
It can make dead end filtration and cross flow filtration.
The flow regime design of Lyma pressure ultrafiltration membrane is dominated by Full flow filtration. But it can expediently transform to cross flow filtration based on the differences of raw water quality.
External pressure ]filtered mode is suitable for high turbidity inlet. It has strong anti pollution capacity and is easy to clean.
Backwashing and air scrubbing can remove the pollution layer and recover the membrane flux.
Product Specifications:
Modular forms |
External pressure type hollow fiber membrane |
|||
Film material |
Modified hydrophilic PVDF (polyvinylidene fluoride) |
|||
Housing material |
UPVC (polyvinyl chloride) |
|||
Nominal diameter |
0.03μm |
|||
The outer diameter of the membrane |
0.75mm /1.45mm |
|||
Component Type |
Components nominal area |
Component Weight (wet) |
Components Water Tanks |
Dimensions |
Lymax-0835HF UF |
35 m2 |
30 kg |
35 L |
Φ200×1760mm |
Lymax-0850HF UF |
50 m2 |
40 kg |
45 L |
Φ200×2260mm |
Lymax-0835FR UF |
35 m2 |
30 kg |
35 L |
Φ200×1760mm |
Lymax-0850FR UF |
50 m2 |
40 kg |
45 L |
Φ200×2260mm |
Design Flux(25℃) |
30~90 L/(m2.h.bar) |
|||
Product water turbidity |
≤ 0.2NTU |
|||
Permeate SDI 15 |
≤ 3 |